Small CNC Laser Cutter for Saw Blade , Ironware Cutting Gas Oxygen
Nitrogen or Air
1. The imported optical components are adopted, and good beam
quality and high electronic-optical conversion efficiency, with
small cuting size 500 * 500 mm, it's more suitable for small metal
2. It is the Metal Laser Cutting Machine with highest Quality-Price
Ratio, which is reliable and stable for long term operation, and
quick, efficient and good economic return, and the cutting kerf is
thin and cutting section is smooth.
3. High cutting precision, which can meet the process requirements
of processing all kinds of metal sheet or plate.
4. Adopting the design of automatic following focusing system, it
will ensure high cutting quality with perfect cutting kerf and no
need any further treatment.
5. Low operation cost, compressed air could be used during any
materials cutting for blowing(if apply oxygen, the cutting speed
would be faster and effect would be better).
6. Cheap price with high cost performance
7. Powerful smoke suction device is configured for solving the old
problems of dusty and poor surrounding conditions during metal
8. Imported Linear guide track, Panasonic servo motor drive, and
precise ball screw drive style are making the mechanical movement
performance of the complete machine achieve optimized .
Stainless steel, carbon steel, alloy steel, silicon steel, spring
steel, aluminum, galvanized sheet, pickle sheet, copper, silver,
gold, monocrystal line silicon, poly silicon, etc.
It is widely applied in fabrication industries of advertising
trademark, metal structure, cabinets, metal processing, electrical
cubicle switchboard, textile machinery, cereal processing
machinery, kitchenware, lamps and lanterns, automobile, metal
handicraft article, saw blade, electrical component, medical
apparatus and instruments, aero-space, ironware, cutting and
measuring tool, etc.
Laser Working Medium
Maximum Output Power
Laser power stability
≤ ± 3 %
Maximum cutting speed
3500mm/min(1mm steel plate)
Maximum cutting thickness
≤ 8 mm(depend on material)
Working table axial location accuracy
≤ ± 0.08 mm/m
Working table repeating location accuracy
≤ ± 0.04 mm/m
Oxygen, Nitrogen or air
Machine total weight
Installation and commissioning
The service from the seller:
1. Dispatch the qualified technicians;
2. Supervision of customer’s personnel for:
a) Supply of labors, carnages and insureance to unload machine and
assist the installation work under the instruction of seller’s
b) Positioning the machine
c) Connecting the cables and hoses to the machine
d) Prepare the installation
3. The buyer’s responsibility
a) An air compressor (mainly for pneumatic movements)
b) A bottle of liquid oxygen (the purity more than 99.99%)
d) Power: 380V 50HZ 3 phase (with a 30KW regulator)
e) Gases, air and electrical supplies are available for the
connection to the machine at the nominated points.
f) Buyer is to ensure the site is clear prior to commencement of
installation, adjusting and training.
g) Supply the metal sheet for commissioning testing, machine
alignment and training.
h) Equipment installation location must be clean, no vibration
The training contents
The buyer should be arrange one or two engineer who know the basic
knowledge of computer and the software to accept the training, the
training will comprise of the following:
11.1. Introduce the machine’s each part’s name and the main
11.2. The machine’s running theory.
11.3. Control features and the operation.
11.4. Machine maintenance and the adjustment.
11.5. Machine’s software each functions and parameters setting.
11.6. Machine’s troubleshooting and the solutions.
Our special Services
13.1. Before sale: buyer inform their main cutting requirements,
for example the metal type, thickness and their daily capacity,
then we will recommend the suitable laser cutting machine;
13.2. After confirmed the laser model, buyer can send their
materials for testing if they want, or we can record the cutting
demo short video and the cutting samples pictures to send to the
buyer by email.
13.3. If buyer wants to come to seller’s factory to see the
machine’s performance, seller will pick them up from the Shanghai
Pu Dong airport by car and reserve the hotel for buyer at the same
time if they need.
Our company mission
1. To provide the laser machines with European quality and China
2. To provide the professional laser solutions to every oversea customers, not only the machine itself;
3. We have a strong service team who can provide the prompt after
sale services to oversea customers within 12 hours.
1, our laser cutting machine the main optic parts are imported from
Germany or USA
2, our machine tools are processed by high temperature casting and
welded which almost no deformation after 3-5 years.
3, we main for exporting, we have our professional after sales
4, we have our own core patent technology, so our machine with high
quality cost performance.
The laser cutting samples of the 650W YAG laser cutting machine: